Our irrigation team on a recent valve replacement (ACRE job photo)

Easton, CA · Hunter repair

Hunter Sprinkler Repair in Easton, CA

Need Hunter repair in Easton? We find the failing part and fix it. We serve Easton from our Fresno location, about 9.5 miles away.

5.0 on Google · 70+ reviews across Fresno & Clovis

Easton watering rules and your Hunter system

A 2019 State Water Board case study says the entire community of Easton is on private wells, because there is no large water purveyor in the area.

In short: private wells; no city schedule.

After a Hunter repair we test each zone and can set the controller to match. See the full Easton watering schedule.

We repair Hunter in Easton

ACRE repairs Hunter sprinkler and irrigation systems in Easton: PGP and PGJ rotors, Pro-Spray heads, MP Rotators, PGV valves, and X-Core and Pro-C controllers.

Everything is repaired from our Fresno location; see our national page on Hunter repair for the full list of Hunter problems we fix.

Hunter PGP or PGJ rotor not rotating in Easton

A Hunter PGP or PGJ that will not turn, will not rise or leaks at the top usually has dirt in the head, a worn gear or a worn seal. We repair or replace the rotor and pick a nozzle that fits the zone.

Easton homes are on private wells, so a broken head is water you pumped yourself.

Hunter X-Core or Pro-C controller problems in Easton

A Hunter X-Core or Pro-C that will not power up, lost its program or skips a zone may have a power, wiring or valve fault. We find which, repair or replace the controller, and set the schedule.

There is no city schedule for Easton homes on wells, so we set the controller for how your plants use water and keep run times short.

About Easton

Easton shares the Fresno area’s semi-arid San Joaquin Valley climate, with long, hot, dry summers, mild winters and about 11 inches of rain a year, so sprinklers carry most of the watering load.

The 2020 census counted 653 housing units in Easton, and about 72.0% of occupied homes are owner-occupied. That works out to about 217 housing units per square mile.

Easton was formerly known as Covel, and later Covell.

Easton has about 217 housing units per square mile, a much lower density than Fresno itself, so lots and landscapes tend to be larger.

Hunter zone leaking or soggy in Easton

A soggy strip, a geyser or a zone that went weak on a Hunter system is often a broken lateral line or fitting rather than the head. We isolate the zone, find the break and repair the pipe.

Easton is about 9.5 miles from our Fresno location. On a well, low pressure on one zone can mean a leak or simply too many heads on one valve.

Helpful guides

Nearby communities

Nearby communities where we repair Hunter systems: Hunter repair in Malaga (3.9 mi), Hunter repair in Fresno (6.0 mi), Hunter repair in Fowler (6.1 mi). Distances are straight-line from the center of Easton.

Written by ACRE Landscape Co., Fresno & Clovis. Updated October 26, 2026.

FAQ

Hunter repair in Easton: common questions

Do you repair Hunter sprinklers in Easton?

Yes. Easton is about 9.5 miles from our Fresno location, and we serve it from there. Type your address in the form at the top of the page and we will confirm it. We repair Hunter and all other major brands.

Do you repair Hunter PGV valves in Easton?

Yes. We repair Hunter PGV valves and test the solenoid and wiring.

Can you fix a Hunter X-Core controller in Easton?

We repair or replace Hunter X-Core and Pro-C controllers and set the schedule.

Do you also repair other brands next to Hunter parts?

Yes. Many yards mix brands, and we repair all major brands.

What are the watering rules in Easton?

Because most Easton homes are on their own wells, there is no city schedule that applies to them. If you have a well, the pump and pressure tank feed your sprinkler system. We work on the sprinkler side, not the pump.

Free estimate

Get a Free Estimate

Type your address in the form at the top of this page to check if we service your area. It takes about a minute.

CallGet a Free Estimate