We repair Hunter in Sanger
Hunter parts are common on Sanger yards, and we repair them: rotor and spray heads, MP Rotators, PGV valves and solenoids, and Hunter controllers. We run each zone, find the failure, and fix it.
Everything is repaired from our Fresno location; see our national page on Hunter repair for the full list of Hunter problems we fix.
About Sanger
Sanger shares the Fresno area’s semi-arid San Joaquin Valley climate, with long, hot, dry summers, mild winters and about 11 inches of rain a year, so sprinklers carry most of the watering load.
The 2020 census counted 7,787 housing units in Sanger, and about 58.6% of occupied homes are owner-occupied. That works out to about 1,350 housing units per square mile.
Sanger is named for Joseph Sanger Jr., an official of the Pacific Improvement Company, an affiliate of the Southern Pacific Railroad.
In 1949 the U.S. Postal Service designated Sanger the “Nation’s Christmas Tree City.”
Hunter PGP or PGJ rotor not rotating in Sanger
A Hunter PGP or PGJ that will not turn, will not rise or leaks at the top usually has dirt in the head, a worn gear or a worn seal. We repair or replace the rotor and pick a nozzle that fits the zone.
In Sanger the rules in short are: Monday/Thursday east of Academy Ave; Wednesday/Sunday (even) or Tuesday/Saturday (odd) elsewhere; never Friday. A cracked or misaimed head puts water where it should not go, and a head that never rises leaves a dry patch until the next watering day.
Hunter and watering in Sanger
Addresses east of Academy Avenue water Monday and Thursday. All other even-numbered addresses water Wednesday and Sunday, and odd-numbered addresses Tuesday and Saturday. There is no watering on Fridays, city-wide, and watering is allowed only 3–7 a.m. and 7 p.m.–midnight.
After a Hunter repair we test each zone and can set the controller to match. See the full Sanger watering schedule.
Hunter X-Core or Pro-C controller problems in Sanger
A Hunter X-Core or Pro-C that will not power up, lost its program or skips a zone may have a power, wiring or valve fault. We find which, repair or replace the controller, and set the schedule.
A controller that loses its program can put you on the wrong days in Sanger (Monday/Thursday east of Academy Ave; Wednesday/Sunday (even) or Tuesday/Saturday (odd) elsewhere; never Friday), so we check the schedule whenever we repair or replace one.
Hunter zone leaking or soggy in Sanger
A soggy strip, a geyser or a zone that went weak on a Hunter system is often a broken lateral line or fitting rather than the head. We isolate the zone, find the break and repair the pipe.
Sanger is about 14.6 miles from our Fresno location. A zone with low pressure or soggy ground usually points to a leaking line, and we trace it zone by zone.
Nearby communities
Nearby communities where we repair Hunter systems: Hunter repair in Del Rey (4.0 mi), Hunter repair in Parlier (6.9 mi), Hunter repair in Fowler (8.8 mi). Distances are straight-line from the center of Sanger.
Helpful guides
Written by ACRE Landscape Co., Fresno & Clovis. Updated October 26, 2026.