Hunter controller on an exterior wall (ACRE job photo)

Kerman, CA · Hunter repair

Hunter Sprinkler Repair in Kerman, CA

Need Hunter repair in Kerman? We find the failing part and fix it. We serve Kerman from our Fresno location, about 15.1 miles away.

5.0 on Google · 70+ reviews across Fresno & Clovis

Kerman watering rules and your Hunter system

Kerman’s outdoor watering rules come from the City of Kerman.

In short: odd Tue/Thu/Sat, even Wed/Fri/Sun (Mar 2–Nov 30); two days in winter; never Mondays.

After a Hunter repair we test each zone and can set the controller to match. See the full Kerman watering schedule.

We repair Hunter in Kerman

ACRE repairs Hunter sprinkler and irrigation systems in Kerman: PGP and PGJ rotors, Pro-Spray heads, MP Rotators, PGV valves, and X-Core and Pro-C controllers.

Everything is repaired from our Fresno location; see our national page on Hunter repair for the full list of Hunter problems we fix.

Hunter PGV valve stuck on or leaking in Kerman

A Hunter PGV valve fails like any valve: debris, a worn diaphragm or a failing solenoid. A zone that stays on, will not close or weeps at the valve box can be rebuilt or replaced, and we test the wire back to the controller.

A valve that sticks open runs a zone when the rules say it should be off (odd Tue/Thu/Sat, even Wed/Fri/Sun (Mar 2–Nov 30); two days in winter; never Mondays), and one that will not open leaves a whole zone dry.

Hunter MP Rotator uneven or weak in Kerman

Hunter MP Rotators water slowly and evenly, so a clogged nozzle or low pressure shows up as a dry fan on the lawn. We clean or replace the nozzle, check pressure on the zone and look for a leak upstream.

In Kerman the rules in short are: odd Tue/Thu/Sat, even Wed/Fri/Sun (Mar 2–Nov 30); two days in winter; never Mondays. A cracked or misaimed head puts water where it should not go, and a head that never rises leaves a dry patch until the next watering day.

About Kerman

Kerman shares the Fresno area’s semi-arid San Joaquin Valley climate, with long, hot, dry summers, mild winters and about 11 inches of rain a year, so sprinklers carry most of the watering load.

The 2020 census counted 4,512 housing units in Kerman, and about 58.9% of occupied homes are owner-occupied. That works out to about 1,381 housing units per square mile.

Kerman began around 1891 as “Collis,” a Southern Pacific watering tank and pump on the new Tracy–Fresno line.

The name Kerman was built from the first three letters of the surnames of developers William G. Kerckhoff and Jacob Mansar, who saw a chance to buy water from the new Enterprise Canal, which drew from the Kings River.

Hunter PGP or PGJ rotor not rotating in Kerman

A Hunter PGP or PGJ that will not turn, will not rise or leaks at the top usually has dirt in the head, a worn gear or a worn seal. We repair or replace the rotor and pick a nozzle that fits the zone.

In Kerman the rules in short are: odd Tue/Thu/Sat, even Wed/Fri/Sun (Mar 2–Nov 30); two days in winter; never Mondays. A cracked or misaimed head puts water where it should not go, and a head that never rises leaves a dry patch until the next watering day.

Helpful guides

Nearby communities

Nearby communities where we repair Hunter systems: Hunter repair in Biola (5.9 mi), Hunter repair in Raisin City (12.0 mi), Hunter repair in Fresno (15.1 mi). Distances are straight-line from the center of Kerman.

Written by ACRE Landscape Co., Fresno & Clovis. Updated October 26, 2026.

FAQ

Hunter repair in Kerman: common questions

Do you repair Hunter sprinklers in Kerman?

Yes. Kerman is about 15.1 miles from our Fresno location, and we serve it from there. Type your address in the form at the top of the page and we will confirm it. We repair Hunter and all other major brands.

Do you also repair other brands next to Hunter parts?

Yes. Many yards mix brands, and we repair all major brands.

Do you repair Hunter PGV valves in Kerman?

Yes. We repair Hunter PGV valves and test the solenoid and wiring.

Can you fix a Hunter X-Core controller in Kerman?

We repair or replace Hunter X-Core and Pro-C controllers and set the schedule.

What are the watering rules in Kerman?

From March 2 through November 30, odd-numbered addresses water Tuesday, Thursday and Saturday, and even-numbered addresses Wednesday, Friday and Sunday. From December 1 through March 1, odd addresses water Tuesday and Saturday and even addresses Wednesday and Sunday. No watering on Mondays, and none between 6 and 8 a.m. or between noon and 7 p.m.

Free estimate

Get a Free Estimate

Type your address in the form at the top of this page to check if we service your area. It takes about a minute.

CallGet a Free Estimate